f35 full tree

Nice wofi based emoji search.

2015-RH-IT-Root-CA.pem

@@ -0,0 +1,25 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

LICENSE

@@ -1,19 +0,0 @@
-MIT License 
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is furnished
-to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice (including the next
-paragraph) shall be included in all copies or substantial portions of the
-Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
-FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS
-OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
-OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

README.md

@@ -1,100 +1,73 @@
-# Vladan's X13 Gen 1 Sway Desktop config
-
-This is an [rpm-ostree](https://coreos.github.io/rpm-ostree/) based minimal
-[Fedora](https://getfedora.org/) developer desktop with the [sway window manager](https://swaywm.org/) and [podman](https://podman.io/)/[toolbox](https://docs.fedoraproject.org/en-US/fedora-silverblue/toolbox/) for doing development and running less common graphical applications.
-
-Run `sudo ./compose.sh` from the root folder of this repo to build the rootfs in a local repo. Don't forget to change the path related env vars.
-
----
-Original README for [workstation-ostree-config](https://pagure.io/workstation-ostree-config)
----
-
-# Manifests for rpm-ostree based Fedora variants
-
-This is the configuration needed to create
-[rpm-ostree](https://coreos.github.io/rpm-ostree/) based variants of Fedora.
-Each variant is described in a YAML
-[treefile](https://coreos.github.io/rpm-ostree/treefile/) which is then used by
-rpm-ostree to compose an ostree commit with the package requested.
-
-In the Fedora infrastructure, this happens via
-[pungi](https://pagure.io/pungi-fedora) with
-[Lorax](https://github.com/weldr/lorax)
-([templates](https://pagure.io/fedora-lorax-templates)).
-
-## Fedora Silverblue
-
-- Website: https://silverblue.fedoraproject.org/ ([sources](https://github.com/fedora-silverblue/silverblue-site))
-- Documentation: https://docs.fedoraproject.org/en-US/fedora-silverblue/ ([sources](https://github.com/fedora-silverblue/silverblue-docs))
-- Issue tracker: https://github.com/fedora-silverblue/issue-tracker/issues
-
-## Fedora Kinoite
-
-- Website: https://kinoite.fedoraproject.org/ ([sources](https://pagure.io/fedora-kde/kinoite-site))
-- Documentation: https://docs.fedoraproject.org/en-US/fedora-kinoite/ ([sources](https://pagure.io/fedora-kde/kinoite-docs))
-- Issue tracker: https://pagure.io/fedora-kde/SIG/issues
-
-## Building
-
-Instructions to perform a local build of Silverblue:
-
-```
-# Clone the config
-git clone https://pagure.io/workstation-ostree-config && cd workstation-ostree-config
-
-# Prepare directories
-mkdir -p repo cache
-ostree --repo=repo init --mode=archive
-
-# Build (compose) the variant of your choice
-sudo rpm-ostree compose tree --repo=repo --cachedir=cache fedora-silverblue.yaml
-
-# Update summary file
-ostree summary --repo=repo --update
-```
-
-## Testing
-
-Instructions to test the resulting build:
-
-- First, serve the ostree repo using an HTTP server. You can use any static file server. For example using <https://github.com/TheWaWaR/simple-http-server>:
-
-  ```
-  simple-http-server --index --ip 192.168.122.1 --port 8000
-  ```
-
-- Then, on an already installed Silverblue system:
-
-```
-# Add an ostree remote
-sudo ostree remote add testremote http://192.168.122.1:8000/repo --no-gpg-verify
-
-# Pin the currently deployed (and probably working) version
-sudo ostree admin pin 0
-
-# List refs from variant remote
-sudo ostree remote refs testremote
-
-# Switch to your variant
-sudo rpm-ostree rebase testremote:fedora/rawhide/x86_64/silverblue
-
-# Reboot and test!
-```
-
-## Historical references
-
-Building and testing instructions:
-
-- https://dustymabe.com/2017/10/05/setting-up-an-atomic-host-build-server/
-- https://dustymabe.com/2017/08/08/how-do-we-create-ostree-repos-and-artifacts-in-fedora/
-- https://www.projectatomic.io/blog/2017/12/compose-custom-ostree/
-- https://www.projectatomic.io/docs/compose-your-own-tree/
-
 For some background, see:
 
-- <https://fedoraproject.org/wiki/Workstation/AtomicWorkstation>
+ - https://fedoraproject.org/wiki/Workstation/AtomicWorkstation
-- <https://fedoraproject.org/wiki/Changes/WorkstationOstree>
+ - https://fedoraproject.org/wiki/Changes/WorkstationOstree
-- <https://fedoraproject.org/wiki/Changes/Silverblue>
-- <https://fedoraproject.org/wiki/Changes/Fedora_Kinoite>
  
-Note also this repo obsoletes https://pagure.io/atomic-ws
+(Note also this repo obsoletes https://pagure.io/atomic-ws)
+
+High level design
+-----------------
+
+The goal of the system is to be a workstation, using
+rpm-ostree for the base OS, and a combination of
+Docker and Flatpak containers, as well as virtualization
+tools such as Vagrant.
+
+Status
+------
+
+This project is actively maintained and is ready for use
+by sophisticated and interested users, but not ready
+for widespread promotion.
+
+See some [https://lists.fedoraproject.org/archives/list/desktop@lists.fedoraproject.org/thread/J6BJS7Z4NKNOQUZWGYXZZIEKYMWBBSUY/](discussion about the first release).
+
+Installing
+------------
+
+See the Silverblue documentation at
+https://docs.fedoraproject.org/en-US/fedora-silverblue/installation-guide/.
+There's also a guide for installing inside an existing system:
+https://docs.fedoraproject.org/en-US/fedora-silverblue/installation-dual-boot/.
+
+Important issues:
+-----------------------
+
+ - [flatpak system repo](https://github.com/flatpak/flatpak/issues/113#issuecomment-247022006)
+
+Using the system
+--------------------
+
+One of the first things you should do use is use a container runtime of your
+choice to manage one or more "pet" containers.  This is where you will use
+`yum/dnf` to install utilities.
+
+With `docker` for example, you can use the `-v /srv:/srv` command line option so
+these containers can share content with your host (such as git repositories).
+Note that if you want to share content between multiple Docker containers and
+the host (e.g. your desktop session), you should execute (once):
+
+```
+sudo chcon -R -h -t container_file_t /var/srv
+```
+
+Next, let's try flatpak. Before you do: There's a known flatpak issue on
+AtomicWS - run [this workaround](https://github.com/flatpak/flatpak/issues/113#issuecomment-247022006),
+which you only need to do once. After that, [try flatpak](http://flatpak.org/apps.html).
+
+If you are a developer for server applications,
+try [oc cluster up](https://github.com/openshift/origin/blob/master/docs/cluster_up_down.md) to
+create a local OpenShift v3 cluster.
+
+Finally, try out `rpm-ostree install` to layer additional packages directly on
+the host. This is needed for "host extensions" - privileged software that
+doesn't make sense to live in a container. For example, `rpm-ostree install
+powerline` to use that software for the shell prompts of the host.  Another
+good example is `rpm-ostree install vagrant-libvirt` to use [Vagrant](https://www.vagrantup.com/)
+to manage VMs.
+
+Future work
+-----------
+
+ - GNOME Software support for both rpm-ostree/flatpak and possibly docker
+ - automated tests that run on this content

better-fonts.repo

@@ -1,6 +1,6 @@
 [copr:copr.fedorainfracloud.org:dawid:better_fonts]
 name=Copr repo for better_fonts owned by dawid
-baseurl=https://download.copr.fedorainfracloud.org/results/dawid/better_fonts/fedora-37-$basearch/
+baseurl=https://download.copr.fedorainfracloud.org/results/dawid/better_fonts/fedora-34-$basearch/
 type=rpm-md
 skip_if_unavailable=True
 gpgcheck=1

compose.sh

@@ -1,7 +1,7 @@
 #!/bin/sh
 set -eu
-CACHE=/var/cache/x13-gen1-sway-ostree
+CACHE=/var/cache/x1-gen7-sway-ostree
-REPO=/srv/ostree/x13-gen1-sway-repo
+REPO=/srv/ostree/repo
 
 mkdir -p $CACHE
 
@@ -9,5 +9,4 @@ if [ ! -d $REPO/objects ]; then
     ostree --repo=$REPO init --mode=archive-z2
 fi
 
-rpm-ostree compose tree --unified-core --cachedir=$CACHE --repo=$REPO x13-gen1-sway-desktop.yaml
+rpm-ostree compose tree --unified-core --cachedir=$CACHE --repo=$REPO x1-gen7-sway-desktop.yaml
-ostree summary --repo=$REPO --update

comps-sync-exclude-list.yml

@@ -141,6 +141,7 @@ desktop_exclude_list:
     - evince-nautilus
     - file-roller
     - file-roller-nautilus
+    - gedit
     - gnome-boxes
     - gnome-calculator
     - gnome-calendar
@@ -154,7 +155,6 @@ desktop_exclude_list:
     - gnome-maps
     - gnome-photos
     - gnome-screenshot
-    - gnome-text-editor
     - gnome-weather
     - jwhois
     - rdist

config.ini

@@ -10,10 +10,10 @@ os_pretty_name = Fedora ostree Workstation
 tree_name   = workstation
 tree_file   = %(os_name)s-%(tree_name)s.json
 arch        = x86_64
-release     = 36
+release     = rawhide
 ref         = %(os_name)s/%(release)s/%(arch)s/%(tree_name)s
 # Force use of a closeish and fastish HTTP mirror, so that the HTTP proxy works
-yum_baseurl = https://download.fedoraproject.org/pub/fedora/linux/development/36/Everything/%(arch)s/os/
+yum_baseurl = https://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/%(arch)s/os/
 # lorax_additional_repos = http://127.0.0.1/fedora-atomic/local-overrides
 # lorax_include_packages = fedora-productimg-atomic
 docker_os_name = fedora

config/modprobe.d/i2c_i801-blacklist.conf

@@ -0,0 +1 @@
+blacklist i2c_i801

config/sway-service.desktop

@@ -0,0 +1,6 @@
+# /usr/share/wayland-sessions/sway-service.desktop
+[Desktop Entry]
+Name=Sway Service
+Comment=i3-compatible Wayland compositor as a systemd service
+Exec=sway-service.sh
+Type=Application

config/sway/bin/keyboard-layout-per-window.py

@@ -1,42 +0,0 @@
-#!/usr/bin/env python
-
-# This script keeps track of active keyboard layouts per window.
-#
-# This script requires i3ipc-python package (install it from a system package
-# manager or pip).
-#
-# https://github.com/swaywm/sway/pull/4504/files
-import i3ipc
-
-sway = i3ipc.Connection()
-prev_focused = sway.get_tree().find_focused().id
-windows = {}
-
-def on_window_focus(ipc, event):
-    global windows, prev_focused
-
-    # Save current layouts
-    layouts = {input.identifier: input.xkb_active_layout_index for input in sway.get_inputs()}
-    windows[prev_focused] = layouts
-
-    # Restore layout of the newly focused window
-    if event.container.id in windows:
-        for (input_id, layout_index) in windows[event.container.id].items():
-            if layout_index != layouts[input_id]:
-                sway.command(f'input "{input_id}" xkb_switch_layout {layout_index}')
-
-    prev_focused = event.container.id
-
-def on_window_close(ipc, event):
-    global windows
-    if event.container.id in windows:
-        del(windows[event.container.id])
-
-def on_window(ipc, event):
-    if event.change == "focus":
-        on_window_focus(ipc, event)
-    elif event.change == "close":
-        on_window_close(ipc, event)
-
-sway.on("window", on_window)
-sway.main()

config/sway/config

@@ -1 +0,0 @@
-include /etc/sway/config.d/*

config/sway/config.d/10-variables.conf

@@ -1,15 +0,0 @@
-### Variables
-#
-# Logo key. Use Mod1 for Alt.
-set $mod Mod4
-# Home row direction keys, like vim
-set $left h
-set $down j
-set $up k
-set $right l
-# Your preferred terminal emulator
-set $term alacritty
-# Your preferred application launcher
-# Note: it's recommended that you pass the final command to sway
-# set $menu wofi -c $HOME/.config/wofi/config -s $HOME/.config/wofi/style.css | xargs swaymsg exec --
-set $menu wldash

config/sway/config.d/20-output.conf

@@ -1,16 +0,0 @@
-### Output configuration
-#
-# Example configuration:
-#
-#   output HDMI-A-1 resolution 1920x1080 position 1920,0
-#
-# You can get the names of your outputs by running: swaymsg -t get_outputs
-#
-output DP-1 bg ~/.config/sway/bkg2.jpg fill
-output DP-1 scale 1.2 res 3840x2160 pos 0 0
-output DP-2 bg ~/.config/sway/bkg2.jpg fill
-output DP-2 scale 1.2 res 3840x2160 pos 0 0
-output HDMI-A-1 bg ~/.config/sway/bkg2.jpg fill
-output HDMI-A-1 scale 1.2 res 3840x2160 pos 0 0
-output eDP-1 bg ~/.config/sway/bkg.jpg fill
-output eDP-1 scale 1.0 res 1920x1080 pos 640 1800

config/sway/config.d/30-input.conf

@@ -1,27 +0,0 @@
-### Input configuration
-#
-# Example configuration:
-#
-#   input "2:14:SynPS/2_Synaptics_TouchPad" {
-#       dwt enabled
-#       tap enabled
-#       natural_scroll enabled
-#       middle_emulation enabled
-#   }
-#
-# You can get the names of your inputs by running: swaymsg -t get_inputs
-# Read `man 5 sway-input` for more information about this section.
-
-input * xkb_layout "us,mk"
-input * xkb_variant "typewriter"
-input * xkb_options "grp:caps_toggle"
-
-# Pulse Audio controls
-bindsym XF86AudioRaiseVolume exec pactl set-sink-volume 0 +5% #increase sound volume
-bindsym XF86AudioLowerVolume exec pactl set-sink-volume 0 -5% #decrease sound volume
-bindsym XF86AudioMute exec pactl set-sink-mute 0 toggle # mute sound
-bindsym XF86AudioMicMute exec pactl set-source-mute  alsa_input.pci-0000_00_1b.0.analog-stereo toggle # mute mic
-
-# Sreen brightness controls
-bindsym XF86MonBrightnessUp exec brightnessctl -q s +10%
-bindsym XF86MonBrightnessDown exec brightnessctl -q s 10%-

config/sway/config.d/50-style.conf

@@ -1,47 +0,0 @@
-#
-# Status Bar:
-#
-# Read `man 5 sway-bar` for more information about this section.
-bar {
-    position top
-
-    # When the status_command prints a new line to stdout, swaybar updates.
-    # The default just shows the current date and time.
-    swaybar_command waybar
-}
-
-# Remove title from windows
-default_border pixel 1
-default_floating_border normal
-bindsym $mod+t border toggle
-
-hide_edge_borders smart
-
-# Background
-set $bg #232425
-# Background active
-set $ba #191919
-# Background inactive
-set $bi #3f3f3f
-# Foreground active
-set $fa #eff1f5
-# Foreground inactive
-set $fi #646464
-# Border active
-set $bra #9a9a9a
-# Border inactive
-set $bri #000000
-
-# class                 border  backgr. text    indicator child_border
-client.focused          $bra    $bra    $bg     $bg       $bra
-client.focused_inactive $bra    $ba     $fa     $bg       $bri
-client.unfocused        $bri    $bi     $fi     $bg       $bri
-#client.urgent          $br    $br     $fg     $bg       $br #currently not implemented
-#client.placeholder     $br    $br     $fg     $bg       $br #currently not implemented
-client.background       $bg
-
-gaps inner 0
-gaps outer 0
-#smart_gaps on
-
-for_window [app_id=".*"] border normal

config/sway/config.d/60-app-windows.conf

@@ -1,34 +0,0 @@
-for_window [class="Firefox"] mark Browser
-for_window [class="Firefox" window_role="Browser"] {
-  border normal 0
-}
-# firefox floating menus
-for_window [window_role="pop-up"] floating enable
-for_window [window_role="task_dialog"] floating enable
-for_window [window_role="pop-up"] floating enable
-for_window [window_role="bubble"] floating enable
-for_window [window_role="task_dialog"] floating enable
-for_window [window_role="Preferences"] floating enable
-for_window [window_type="dialog"] floating enable
-for_window [window_type="menu"] floating enable
-for_window [title="About Mozilla Firefox"] floating enabled
-for_window [title="Password Required - Mozilla Firefox"] floating enabled
-for_window [app_id="pinentry-qt"] {
-  move position center
-  floating enable
-}
-for_window [app_id="pavucontrol"] {
-  move position center
-  floating enable
-}
-for_window [app_id="wdisplays"] {
-  floating enable
-}
-for_window [app_id="com.nextcloud.desktopclient.nextcloud"] {
-  border normal 1
-  floating enable
-}
-
-for_window [app_id="avizo-service"] border pixel 0
-for_window [app_id="avizo-service"] sticky toggle
-no_focus [app_id="avizo-service"]

config/sway/config.d/90-bindings.conf

@@ -1,150 +0,0 @@
-### Key bindings
-#
-# Basics:
-#
-    # start a terminal
-    bindsym $mod+Return exec $term
-
-    # kill focused window
-    bindsym $mod+Shift+q kill
-
-    # start your launcher
-    bindsym $mod+d exec $menu
-
-    # Drag floating windows by holding down $mod and left mouse button.
-    # Resize them with right mouse button + $mod.
-    # Despite the name, also works for non-floating windows.
-    # Change normal to inverse to use left mouse button for resizing and right
-    # mouse button for dragging.
-    floating_modifier $mod normal
-
-    # reload the configuration file
-    bindsym $mod+Shift+c reload
-
-    # exit sway (logs you out of your Wayland session)
-    bindsym $mod+Shift+e exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -b 'Yes, exit sway' 'swaymsg exit'
-#
-# Moving around:
-#
-    # Move your focus around
-    bindsym $mod+$left focus left
-    bindsym $mod+$down focus down
-    bindsym $mod+$up focus up
-    bindsym $mod+$right focus right
-    # or use $mod+[up|down|left|right]
-    bindsym $mod+Left focus left
-    bindsym $mod+Down focus down
-    bindsym $mod+Up focus up
-    bindsym $mod+Right focus right
-
-    # _move_ the focused window with the same, but add Shift
-    bindsym $mod+Shift+$left move left
-    bindsym $mod+Shift+$down move down
-    bindsym $mod+Shift+$up move up
-    bindsym $mod+Shift+$right move right
-    # ditto, with arrow keys
-    bindsym $mod+Shift+Left move left
-    bindsym $mod+Shift+Down move down
-    bindsym $mod+Shift+Up move up
-    bindsym $mod+Shift+Right move right
-#
-# Workspaces:
-#
-    # switch to workspace
-    bindsym $mod+1 workspace 1
-    bindsym $mod+2 workspace 2
-    bindsym $mod+3 workspace 3
-    bindsym $mod+4 workspace 4
-    bindsym $mod+5 workspace 5
-    bindsym $mod+6 workspace 6
-    bindsym $mod+7 workspace 7
-    bindsym $mod+8 workspace 8
-    bindsym $mod+9 workspace 9
-    bindsym $mod+0 workspace 10
-    # move focused container to workspace
-    bindsym $mod+Shift+1 move container to workspace 1
-    bindsym $mod+Shift+2 move container to workspace 2
-    bindsym $mod+Shift+3 move container to workspace 3
-    bindsym $mod+Shift+4 move container to workspace 4
-    bindsym $mod+Shift+5 move container to workspace 5
-    bindsym $mod+Shift+6 move container to workspace 6
-    bindsym $mod+Shift+7 move container to workspace 7
-    bindsym $mod+Shift+8 move container to workspace 8
-    bindsym $mod+Shift+9 move container to workspace 9
-    bindsym $mod+Shift+0 move container to workspace 10
-    # Note: workspaces can have any name you want, not just numbers.
-    # We just use 1-10 as the default.
-#
-# Layout stuff:
-#
-    # You can "split" the current object of your focus with
-    # $mod+b or $mod+v, for horizontal and vertical splits
-    # respectively.
-    bindsym $mod+b splith
-    bindsym $mod+v splitv
-
-    # Switch the current container between different layout styles
-    bindsym $mod+s layout stacking
-    bindsym $mod+w layout tabbed
-    bindsym $mod+e layout toggle split
-
-    # Make the current focus fullscreen
-    bindsym $mod+f fullscreen
-
-    # Toggle the current focus between tiling and floating mode
-    bindsym $mod+Shift+space floating toggle
-
-    # Swap focus between the tiling area and the floating area
-    bindsym $mod+space focus mode_toggle
-
-    # move focus to the parent container
-    bindsym $mod+a focus parent
-#
-# Scratchpad:
-#
-    # Sway has a "scratchpad", which is a bag of holding for windows.
-    # You can send windows there and get them back later.
-
-    # Move the currently focused window to the scratchpad
-    bindsym $mod+Shift+minus move scratchpad
-
-    # Show the next scratchpad window or hide the focused scratchpad window.
-    # If there are multiple scratchpad windows, this command cycles through them.
-    bindsym $mod+minus scratchpad show
-
-
-
-# Lock screen
-bindsym $mod+z exec swaylock -c 000000
-
-# Take full screen screenshot with PrtScr
-bindsym Print exec grim -t png /tmp/screen.png
-# Take area screenshot with Shift+PrtScr
-bindsym Shift+Print exec grim -g "$(slurp)" /tmp/screen.png
-
-#
-# Resizing containers:
-#
-    bindsym $mod+r mode "resize"
-
-    mode "resize" {
-        # left will shrink the containers width
-        # right will grow the containers width
-        # up will shrink the containers height
-        # down will grow the containers height
-        bindsym $left resize shrink width 10px
-        bindsym $down resize grow height 10px
-        bindsym $up resize shrink height 10px
-        bindsym $right resize grow width 10px
-
-        # ditto, with arrow keys
-        bindsym Left resize shrink width 10px
-        bindsym Down resize grow height 10px
-        bindsym Up resize shrink height 10px
-        bindsym Right resize grow width 10px
-
-        # return to default mode
-        bindsym Return mode "default"
-        bindsym Escape mode "default"
-    }
-

config/sway/config.d/91-swaysome.conf

@@ -1,52 +0,0 @@
-# Change focus between workspaces
-unbindsym $mod+1
-unbindsym $mod+2
-unbindsym $mod+3
-unbindsym $mod+4
-unbindsym $mod+5
-unbindsym $mod+6
-unbindsym $mod+7
-unbindsym $mod+8
-unbindsym $mod+9
-unbindsym $mod+0
-bindsym $mod+1 exec "swaysome focus 1"
-bindsym $mod+2 exec "swaysome focus 2"
-bindsym $mod+3 exec "swaysome focus 3"
-bindsym $mod+4 exec "swaysome focus 4"
-bindsym $mod+5 exec "swaysome focus 5"
-bindsym $mod+6 exec "swaysome focus 6"
-bindsym $mod+7 exec "swaysome focus 7"
-bindsym $mod+8 exec "swaysome focus 8"
-bindsym $mod+9 exec "swaysome focus 9"
-bindsym $mod+0 exec "swaysome focus 0"
-
-# Move containers between workspaces
-unbindsym $mod+Shift+1
-unbindsym $mod+Shift+2
-unbindsym $mod+Shift+3
-unbindsym $mod+Shift+4
-unbindsym $mod+Shift+5
-unbindsym $mod+Shift+6
-unbindsym $mod+Shift+7
-unbindsym $mod+Shift+8
-unbindsym $mod+Shift+9
-unbindsym $mod+Shift+0
-bindsym $mod+Shift+1 exec "swaysome move 1"
-bindsym $mod+Shift+2 exec "swaysome move 2"
-bindsym $mod+Shift+3 exec "swaysome move 3"
-bindsym $mod+Shift+4 exec "swaysome move 4"
-bindsym $mod+Shift+5 exec "swaysome move 5"
-bindsym $mod+Shift+6 exec "swaysome move 6"
-bindsym $mod+Shift+7 exec "swaysome move 7"
-bindsym $mod+Shift+8 exec "swaysome move 8"
-bindsym $mod+Shift+9 exec "swaysome move 9"
-bindsym $mod+Shift+0 exec "swaysome move 0"
-
-# Move focused container to next output
-bindsym $mod+o exec "swaysome next_output"
-
-# Move focused container to previous output
-bindsym $mod+Shift+o exec "swaysome prev_output"
-
-# Init workspaces for every screen
-exec "swaysome init 1"

config/sway/config.d/99-startup.conf

@@ -1,3 +0,0 @@
-exec "/usr/local/bin/keyboard-layout-per-window.py"
-exec "systemctl --user start sway-session.target"
-exec dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP=sway

config/systemd/sway-session.target

@@ -0,0 +1,6 @@
+[Unit]
+Description=sway compositor session
+Documentation=man:systemd.special(7)
+BindsTo=graphical-session.target wayland-session.target
+Wants=graphical-session-pre.target
+After=graphical-session-pre.target

config/systemd/wayland-session.target

@@ -0,0 +1,16 @@
+#  SPDX-License-Identifier: LGPL-2.1+
+#
+#  This file is inspired from systemd's `graphical-session.target`
+#
+#  systemd is free software; you can redistribute it and/or modify it
+#  under the terms of the GNU Lesser General Public License as published by
+#  the Free Software Foundation; either version 2.1 of the License, or
+#  (at your option) any later version.
+
+[Unit]
+Description=Current wayland user session
+Documentation=man:systemd.special(7)
+Requires=basic.target
+RefuseManualStart=yes
+StopWhenUnneeded=yes
+BindsTo=graphical-session.target

config/waybar/config

@@ -1,90 +1,95 @@
 {
-  "layer": "top", // Waybar at top layer
+    "layer": "top",
-  "position": "bottom", // Waybar position (top|bottom|left|right)
+    "position": "bottom",
-  "height": 30,
+    "height": 24,
-  "modules-left": ["sway/workspaces", "sway/mode", "sway/window"],
+    "modules-left": ["sway/workspaces", "idle_inhibitor", "sway/mode"],
-  "modules-center": [],
+    "modules-center": ["sway/window"],
-  "modules-right": ["temperature", "network", "battery", "pulseaudio", "backlight", "cpu", "memory", "custom/layout", "clock", "tray"],
+    "modules-right": [ "pulseaudio", "backlight", "network", "cpu", "memory", "battery#bat0", "battery#bat1",
-  // Module config
+                       "tray", "sway/language", "clock" ],
+    "sway/workspaces": {
+         "disable-scroll": true,
+         "all-outputs": true,
+         "format": "{index} {name}"
+    },
     "sway/mode": {
-    "tooltip": true,
+        "format": "{}"
-    "format": "<span weight=\"bold\">{}</span>"
     },
-  "temperature": {
+    "sway/language": {
-    "thermal-zone": 1,
+        "format": "{}",
-    "hwmon-path": "/sys/class/hwmon/hwmon2/temp3_input",
+        "max-length": 50
-    "critical-threshold": 80,
-    "format-critical": "🌡 {temperatureC}°C",
-    "format": " {temperatureC}°C"
     },
-  "custom/vpn": {
+    "tray": {
+        // "icon-size": 21,
+        "spacing": 10
+    },
+    "clock": {
+        "tooltip-format": "{:%A\n%d %B %Y\n%H:%M}",
+        "format": "{:%a %d %b %H:%M}",
+        "format-alt": "{:%H:%M}"
+    },
+    "cpu": {
+        "format": "{usage:2}% "
+    },
+    "memory": {
+        "format": "{}% "
+    },
+    "battery#bat0": {
+        "bat": "BAT0",
+        "name": "BAT0",
+        "states": {
+            "warning": 20,
+            "critical": 10
+        },
+        "format": "{capacity}% {icon}",
+        "format-icons": ["", "", "", "", ""]
+    },
+    "battery#bat1": {
+        "bat": "BAT1",
+        "name": "BAT1",
+        "states": {
+            "warning": 20,
+            "critical": 10
+        },
+        "format": "{capacity}% {icon}",
+        "format-icons": ["", "", "", "", ""]
     },
     "network": {
-    "tooltip": false,
+        "interval": 1,
-    "interface": "wlp3s0*",
+        "max-width": 50,
-    "format-wifi": " {essid} ({signalStrength}%)",
+        // "interface": "wlp2s0", // (Optional) To force the use of this interface
-    "format-ethernet": "{ifname}: {ipaddr}/{cidr}",
+        "format-wifi": "",
-    "format-linked": "{ifname} (No IP)",
+        "format-ethernet": "{bandwidthUpBits} {bandwidthDownBits} ",
-    "format-alt": "{ifname}: {ipaddr}",
+        "format-disconnected": "⚠",
-    "format-disconnected": "No internet"
+        "tooltip-format-wifi": " {essid}: {frequency}Mhz ({signalStrength}%)\n{bandwidthUpBits}\n{bandwidthDownBits}",
-  },
+        "tooltip-format-ethernet": " {ifname}: {ipaddr}/{cidr}",
-  "battery": {
+        "tooltip-format-disconnected": "⚠ Disconnected"
-    "tooltip": false,
-    "states": {
-        "good": 95,
-        "warning": 30,
-        "critical": 15
-    },
-    "format": "{icon} {capacity}%",
-    "format-alt": "{time} {icon} {power}",
-    "format-charging": " {capacity}%",
-    "format-icons": ["🪫", "", "🔋"],
-    "format-plugged": " {capacity}%"
-  },
-  "backlight": {
-    "device": "amdgpu_bl0",
-    "format": "{icon} {percent}%",
-    "format-icons": ["", ""]
     },
     "pulseaudio": {
-    "tooltip": true,
+        //"scroll-step": 1,
-    "scroll-step": 1.0,
+        "format": "{volume}% {icon}",
-    "format": "{icon} {volume}%",
+        "format-bluetooth": "{volume}% {icon}",
-    "format-bluetooth": " {volume}%",
+        "format-muted": "",
-    "format-muted": "🔇",
-    "format-source": "{volume}%",
-    "format-source-muted": "🔇",
         "format-icons": {
-        "headphones": "🎧",
+            "headphones": "",
-        "handsfree": "🎧",
+            "handsfree": "",
-        "headset": "🎧",
+            "headset": "",
             "phone": "",
             "portable": "",
             "car": "",
-        "default": ["🔊"]
+            "default": ["", ""]
         },
         "on-click": "pavucontrol"
     },
-  "cpu": {
+    "backlight": {
-    "interval": 5,
+        "device": "intel_backlight",
-    "tooltip": false,
+        "format": "{percent}% {icon}",
-    "format": " {usage}%"
+        "format-icons": ["", ""]
     },
-  "memory": {
+    "idle_inhibitor": {
-    "format": " {}%"
+        "format": "{icon}",
-  },
+        "format-icons": {
-  "custom/layout": {
+            "activated": "",
-    "exec": "/etc/xdg/waybar/keyboard-layout.py",
+            "deactivated": ""
-    "return-type": "json",
+        }
-    "format": "| <span color='#ef9f33'>{}</span>"
-  },
-  "clock": {
-    "tooltip": false,
-    "format": "| {:%d.%m.%Y %H:%M}"
-  },
-  "tray": {
-    "tooltip": false,
-    "icon-size": 18,
-    "spacing": 5
     }
 }

config/waybar/keyboard-layout.py

@@ -1,36 +0,0 @@
-#!/usr/bin/python
-import i3ipc
-import json
-
-
-long_to_short = {
-    'English (US)': 'en',
-    'Macedonian': 'mk',
-}
-
-def print_status(keyboard):
-    layout  = keyboard.xkb_active_layout_name
-    short_code = long_to_short.get(layout, layout)
-    output = {"text": short_code, "tooltip": layout, "class": short_code}
-    print(json.dumps(output), flush=True)
-
-def find_keyboard(sway):
-    # *the* keyboard is the one with more than one layout
-    for input_dev in sway.get_inputs():
-        if input_dev.type == 'keyboard' and len(input_dev.xkb_layout_names) > 1:
-            return input_dev
-
-def on_input(sway, event):
-    if event.change == "xkb_layout" and \
-        event.input.identifier == sway.keyboard.identifier:
-        print_status(event.input)
-
-def main():
-    sway = i3ipc.Connection()
-    sway.keyboard = find_keyboard(sway)
-    print_status(sway.keyboard)
-
-    sway.on(i3ipc.Event.INPUT, on_input)
-    sway.main()
-
-main()

config/waybar/style.css

@@ -1,13 +1,14 @@
 * {
     border: none;
     border-radius: 0;
-    font-family: Consolas, "Material Design Icons";
+    font-family: Roboto, Helvetica, Arial, sans-serif;
-    font-size: 1em;
+    font-size: 13px;
     min-height: 0;
 }
 
 window#waybar {
-    background-color: rgba(11, 11, 11, 0.8);
+    background-color: rgba(43, 48, 59, 0.5);
+    border-bottom: 3px solid rgba(100, 114, 125, 0.5);
     color: #ffffff;
     transition-property: background-color;
     transition-duration: .5s;
@@ -17,20 +18,6 @@ window#waybar.hidden {
     opacity: 0.2;
 }
 
-#window {
-  padding: 0 15px;
-}
-
-window {
-    color:      rgba(217, 216, 216, 1);
-    background: rgba(35, 31, 32, 0.00);
-}
-
-window#waybar.solo {
-    color:      rgba(217, 216, 216, 1);
-    background: rgba(35, 31, 32, 0.85);
-}
-
 /*
 window#waybar.empty {
     background-color: transparent;
@@ -40,84 +27,187 @@ window#waybar.solo {
 }
 */
 
-/* https://github.com/Alexays/Waybar/wiki/FAQ#the-workspace-buttons-have-a-strange-hover-effect */
+window#waybar.termite {
+    background-color: #3F3F3F;
+}
+
+window#waybar.chromium {
+    background-color: #000000;
+    border: none;
+}
+
 #workspaces button {
     padding: 0 5px;
     background-color: transparent;
-    border-bottom: 2px solid rgba(180, 14, 25, 0.5);
+    color: #ffffff;
-    color: #999999;
+    border-bottom: 3px solid transparent;
+}
+
+/* https://github.com/Alexays/Waybar/wiki/FAQ#the-workspace-buttons-have-a-strange-hover-effect */
+#workspaces button:hover {
+    background: rgba(0, 0, 0, 0.2);
+    box-shadow: inherit;
+    border-bottom: 3px solid #ffffff;
 }
 
 #workspaces button.focused {
-  color: #ffffff;
+    background-color: #64727D;
-    background-color: #333333;
+    border-bottom: 3px solid #ffffff;
-    border-bottom: 2px solid #ff9600;
 }
 
 #workspaces button.urgent {
     background-color: #eb4d4b;
 }
 
-#clock,
+#mode {
-#custom-vpn,
+    background-color: #64727D;
-#battery,
+    border-bottom: 3px solid #ffffff;
+}
+
 #cpu,
 #memory,
+#temperature,
 #backlight,
 #network,
 #pulseaudio,
+#custom-media,
 #tray,
-#temperature,
 #mode,
 #idle_inhibitor {
-    padding: 0 5px;
+    padding: 0 10px;
     margin: 0 4px;
-    background-color: transparent;
-    border-bottom: 2px solid #bdbd45;
     color: #ffffff;
 }
 
-#temperature {
+#clock {
-    border-bottom: 2px solid #42a832;
+    padding: 0 10px;
+    color: #ffffff;
+    background-color: #64727D;
 }
-#mode {
+
-  background-color: #00ff96;
+#battery .BAT0 {
+    margin-left: 9px;
+}
+#battery .BAT1 {
+    margin-right: 9px;
+}
+#battery {
+    padding: 0 10px;
+    background-color: #ffffff;
     color: #000000;
 }
 
-#pulseaudio,
-#clock,
-#tray,
-#cpu {
-  border-bottom: transparent;
-}
-
-#battery {
-  border-bottom: 2px solid #bff874;
-}
-
 #battery.charging {
-  border-bottom: 2px solid #00ff96;
+    color: #ffffff;
+    background-color: #26A65B;
+}
+
+@keyframes blink {
+    to {
+        background-color: #ffffff;
+        color: #000000;
+    }
 }
 
-#custom-vpn.down,
-#temperature.critical,
 #battery.critical:not(.charging) {
-  border-bottom: 2px solid #dd2241;
+    background-color: #f53c3c;
+    color: #ffffff;
+    animation-name: blink;
+    animation-duration: 0.5s;
+    animation-timing-function: linear;
+    animation-iteration-count: infinite;
+    animation-direction: alternate;
 }
 
 label:focus {
     background-color: #000000;
 }
 
-#network.disconnected {
+#cpu {
-  border-bottom: 2px solid #dd2241;
+    background-color: #2ecc71;
+    color: #000000;
 }
 
-#pulseaudio.bluetooth {
+#memory {
-  border-bottom: 2px solid #1a8cff;
+    background-color: #9b59b6;
+}
+
+#backlight {
+    background-color: #90b1b1;
+}
+
+#network {
+    background-color: #2980b9;
+}
+
+#network.disconnected {
+    background-color: #f53c3c;
+}
+
+#pulseaudio {
+    background-color: #f1c40f;
+    color: #000000;
 }
 
 #pulseaudio.muted {
-  border-bottom: 2px solid #fff569;
+    background-color: #90b1b1;
+    color: #2a5c45;
 }
+
+#custom-media {
+    background-color: #66cc99;
+    color: #2a5c45;
+    min-width: 100px;
+}
+
+#custom-media.custom-spotify {
+    background-color: #66cc99;
+}
+
+#custom-media.custom-vlc {
+    background-color: #ffa000;
+}
+
+#temperature {
+    background-color: #f0932b;
+}
+
+#temperature.critical {
+    background-color: #eb4d4b;
+}
+
+#tray {
+    background-color: #2980b9;
+}
+
+#idle_inhibitor {
+    background-color: #2d3436;
+}
+
+#idle_inhibitor.activated {
+    background-color: #ecf0f1;
+    color: #2d3436;
+}
+
+#mpd {
+    background-color: #66cc99;
+    color: #2a5c45;
+}
+
+#mpd.disconnected {
+    background-color: #f53c3c;
+}
+
+#mpd.stopped {
+    background-color: #90b1b1;
+}
+
+#mpd.paused {
+    background-color: #51a37a;
+}
+#custom-layout {
+    background-color: #ecf0f1;
+    color: #2d3436;
+    min-width: 2em;
+}
+

config/wldash.yaml

@@ -1,82 +0,0 @@
----
-outputMode: active
-scale: 0.6
-background:
-  red: 0.0
-  green: 0.0
-  blue: 0.0
-  opacity: 0.8999999761581421
-widget:
-  margin:
-    margins:
-      - 20
-      - 20
-      - 20
-      - 20
-    widget:
-      verticalLayout:
-        - horizontalLayout:
-            - margin:
-                margins:
-                  - 0
-                  - 88
-                  - 0
-                  - 32
-                widget:
-                  verticalLayout:
-                    - date:
-                        font: ~
-                        font_size: 64.0
-                    - clock:
-                        font: ~
-                        font_size: 256.0
-            - verticalLayout:
-                - margin:
-                    margins:
-                      - 0
-                      - 0
-                      - 0
-                      - 8
-                    widget:
-                      battery:
-                        font: ~
-                        font_size: 24.0
-                        length: 0
-                - margin:
-                    margins:
-                      - 0
-                      - 0
-                      - 0
-                      - 8
-                    widget:
-                      backlight:
-                        device: intel_backlight
-                        font: ~
-                        font_size: 24.0
-                        length: 0
-                - margin:
-                    margins:
-                      - 0
-                      - 0
-                      - 0
-                      - 8
-                    widget:
-                      pulseAudio:
-                        font: ~
-                        font_size: 24.0
-                        length: 0
-        - calendar:
-            font_primary: ~
-            font_secondary: ~
-            font_size: 16.0
-            sections: 3
-        - launcher:
-            font: ~
-            font_size: 32.0
-            length: 0
-            app_opener: ""
-            term_opener: ""
-            url_opener: ""
-fonts:
-  sans: sans
-  mono: mono

fedora-35-updates.repo

@@ -0,0 +1,6 @@
+[fedora-35-updates]
+name=Fedora 35 $basearch Updates
+mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=updates-released-f35&arch=$basearch
+enabled=0
+gpgcheck=1
+metadata_expire=1d

fedora-35.repo

@@ -1,6 +1,6 @@
-[fedora-37]
+[fedora-35]
-name=Fedora 37 $basearch
+name=Fedora 35 $basearch
-mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=fedora-37&arch=$basearch
+mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=fedora-35&arch=$basearch
-enabled=1
+enabled=0
 gpgcheck=1
 metadata_expire=1d

fedora-37-updates.repo

@@ -1,6 +0,0 @@
-[fedora-37-updates]
-name=Fedora 37 $basearch Updates
-mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=updates-released-f37&arch=$basearch
-enabled=1
-gpgcheck=1
-metadata_expire=1d

fedora-common-ostree-pkgs.yaml

@@ -54,29 +54,15 @@ packages:
   - firewalld
   - fpaste
   - fros-gnome
-  - fwupd
   - gamemode
   - glibc
   - glibc-all-langpacks
   - glx-utils
   - gnupg2
   - google-noto-emoji-color-fonts
-  - google-noto-naskh-arabic-vf-fonts
-  - google-noto-sans-armenian-vf-fonts
-  - google-noto-sans-canadian-aboriginal-vf-fonts
-  - google-noto-sans-cherokee-vf-fonts
   - google-noto-sans-cjk-ttc-fonts
-  - google-noto-sans-ethiopic-vf-fonts
+  - google-noto-sans-gurmukhi-fonts
-  - google-noto-sans-georgian-vf-fonts
-  - google-noto-sans-gurmukhi-vf-fonts
-  - google-noto-sans-hebrew-vf-fonts
-  - google-noto-sans-lao-vf-fonts
-  - google-noto-sans-math-vf-fonts
-  - google-noto-sans-mono-vf-fonts
   - google-noto-sans-sinhala-vf-fonts
-  - google-noto-sans-thaana-vf-fonts
-  - google-noto-sans-vf-fonts
-  - google-noto-serif-vf-fonts
   - gstreamer1-plugins-bad-free
   - gstreamer1-plugins-good
   - gstreamer1-plugins-ugly-free
@@ -96,6 +82,8 @@ packages:
   - iptables-nft
   - iptstate
   - iputils
+  - ipw2100-firmware
+  - ipw2200-firmware
   - iwl100-firmware
   - iwl1000-firmware
   - iwl105-firmware
@@ -133,7 +121,6 @@ packages:
   - lohit-devanagari-fonts
   - lohit-gujarati-fonts
   - lohit-kannada-fonts
-  - lohit-marathi-fonts
   - lohit-odia-fonts
   - lohit-tamil-fonts
   - lohit-telugu-fonts
@@ -144,6 +131,7 @@ packages:
   - mdadm
   - mesa-dri-drivers
   - mesa-vulkan-drivers
+  - mlocate
   - mpage
   - mtr
   - nfs-utils
@@ -178,7 +166,6 @@ packages:
   - qt5-qtxmlpatterns
   - quota
   - realmd
-  - rit-meera-new-fonts
   - rootfiles
   - rpm
   - rsync
@@ -186,9 +173,11 @@ packages:
   - selinux-policy-targeted
   - setup
   - shadow-utils
+  - sil-abyssinica-fonts
   - sil-mingzat-fonts
   - sil-nuosu-fonts
   - sil-padauk-fonts
+  - smc-meera-fonts
   - sos
   - spice-vdagent
   - sssd

fedora-common-ostree.yaml

@@ -96,23 +96,3 @@ exclude-packages:
   - gstreamer1-plugin-openh264
   - mozilla-openh264
   - openh264
-
-postprocess:
-  - |
-    #!/usr/bin/env bash
-    set -xeuo pipefail
-
-    # Work around https://bugzilla.redhat.com/show_bug.cgi?id=1265295
-    # From https://github.com/coreos/fedora-coreos-config/blob/testing-devel/overlay.d/05core/usr/lib/systemd/journald.conf.d/10-coreos-persistent.conf
-    install -dm0755 /usr/lib/systemd/journald.conf.d/
-    echo -e "[Journal]\nStorage=persistent" > /usr/lib/systemd/journald.conf.d/10-persistent.conf
-
-    # See: https://src.fedoraproject.org/rpms/glibc/pull-request/4
-    # Basically that program handles deleting old shared library directories
-    # mid-transaction, which never applies to rpm-ostree. This is structured as a
-    # loop/glob to avoid hardcoding (or trying to match) the architecture.
-    for x in /usr/sbin/glibc_post_upgrade.*; do
-        if test -f ${x}; then
-            ln -srf /usr/bin/true ${x}
-        fi
-    done

greetd-35.repo

@@ -1,6 +1,6 @@
 [copr:copr.fedorainfracloud.org:alebastr:sway-extras]
 name=Copr repo for sway-extras owned by alebastr
-baseurl=https://download.copr.fedorainfracloud.org/results/alebastr/sway-extras/fedora-37-$basearch/
+baseurl=https://download.copr.fedorainfracloud.org/results/alebastr/sway-extras/fedora-35-$basearch/
 type=rpm-md
 skip_if_unavailable=True
 gpgcheck=1

kde-desktop-pkgs.yaml

@@ -6,7 +6,6 @@ packages:
   - breeze-icon-theme
   - dolphin
   - firewall-config
-  - fprintd-pam
   - glibc-all-langpacks
   - gnome-keyring-pam
   - initial-setup-gui

post.sh

@@ -26,6 +26,3 @@ for x in /usr/sbin/glibc_post_upgrade.*; do
         ln -srf /usr/bin/true ${x}
     fi
 done
-
-# enable services
-systemctl enable greetd

rpmfusion-free-35.repo

@@ -1,32 +1,33 @@
-[rpmfusion-free-37]
+[rpmfusion-free-35]
-name=RPM Fusion for Fedora 37 - Free
+name=RPM Fusion for Fedora 35 - Free
-#baseurl=http://download1.rpmfusion.org/free/fedora/releases/36/Everything/$basearch/os/
+#baseurl=http://download1.rpmfusion.org/free/fedora/releases/35/Everything/$basearch/os/
-metalink=https://mirrors.rpmfusion.org/metalink?repo=free-fedora-37&arch=$basearch
+metalink=https://mirrors.rpmfusion.org/metalink?repo=free-fedora-35&arch=$basearch
 enabled=0
 metadata_expire=14d
 type=rpm-md
 gpgcheck=1
 repo_gpgcheck=0
-gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-free-fedora-37
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-free-fedora-35
 
-[rpmfusion-free-debuginfo-37]
+[rpmfusion-free-debuginfo-35]
-name=RPM Fusion for Fedora 37 - Free - Debug
+name=RPM Fusion for Fedora 35 - Free - Debug
-#baseurl=http://download1.rpmfusion.org/free/fedora/releases/36/Everything/$basearch/debug/
+#baseurl=http://download1.rpmfusion.org/free/fedora/releases/35/Everything/$basearch/debug/
-metalink=https://mirrors.rpmfusion.org/metalink?repo=free-fedora-debug-37&arch=$basearch
+metalink=https://mirrors.rpmfusion.org/metalink?repo=free-fedora-debug-35&arch=$basearch
 enabled=0
 metadata_expire=7d
 type=rpm-md
 gpgcheck=1
 repo_gpgcheck=0
-gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-free-fedora-37
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-free-fedora-35
 
-[rpmfusion-free-source-37]
+[rpmfusion-free-source-35]
-name=RPM Fusion for Fedora 37 - Free - Source
+name=RPM Fusion for Fedora 35 - Free - Source
-#baseurl=http://download1.rpmfusion.org/free/fedora/releases/36/Everything/source/SRPMS/
+#baseurl=http://download1.rpmfusion.org/free/fedora/releases/35/Everything/source/SRPMS/
-metalink=https://mirrors.rpmfusion.org/metalink?repo=free-fedora-source-37&arch=$basearch
+metalink=https://mirrors.rpmfusion.org/metalink?repo=free-fedora-source-35&arch=$basearch
 enabled=0
 metadata_expire=7d
 type=rpm-md
 gpgcheck=1
 repo_gpgcheck=0
-gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-free-fedora-37
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-free-fedora-35
+

rpmfusion-free-updates-35.repo

@@ -0,0 +1,30 @@
+[rpmfusion-free-updates-35]
+name=RPM Fusion for Fedora 35 - Free - Updates
+#baseurl=http://download1.rpmfusion.org/free/fedora/updates/35/$basearch/
+metalink=https://mirrors.rpmfusion.org/metalink?repo=free-fedora-updates-released-35&arch=$basearch
+enabled=0
+type=rpm-md
+gpgcheck=1
+repo_gpgcheck=0
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-free-fedora-35
+
+[rpmfusion-free-updates-debuginfo-35]
+name=RPM Fusion for Fedora 35 - Free - Updates Debug
+#baseurl=http://download1.rpmfusion.org/free/fedora/updates/35/$basearch/debug/
+metalink=https://mirrors.rpmfusion.org/metalink?repo=free-fedora-updates-released-debug-35&arch=$basearch
+enabled=0
+type=rpm-md
+gpgcheck=1
+repo_gpgcheck=0
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-free-fedora-35
+
+[rpmfusion-free-updates-source-35]
+name=RPM Fusion for Fedora 35 - Free - Updates Source
+#baseurl=http://download1.rpmfusion.org/free/fedora/updates/35/SRPMS/
+metalink=https://mirrors.rpmfusion.org/metalink?repo=free-fedora-updates-released-source-35&arch=$basearch
+enabled=0
+type=rpm-md
+gpgcheck=1
+repo_gpgcheck=0
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-free-fedora-35
+

rpmfusion-free-updates-37.repo

@@ -1,29 +0,0 @@
-[rpmfusion-free-updates-37]
-name=RPM Fusion for Fedora 37 - Free - Updates
-#baseurl=http://download1.rpmfusion.org/free/fedora/updates/36/$basearch/
-metalink=https://mirrors.rpmfusion.org/metalink?repo=free-fedora-updates-released-37&arch=$basearch
-enabled=0
-type=rpm-md
-gpgcheck=1
-repo_gpgcheck=0
-gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-free-fedora-37
-
-[rpmfusion-free-updates-debuginfo-37]
-name=RPM Fusion for Fedora 37 - Free - Updates Debug
-#baseurl=http://download1.rpmfusion.org/free/fedora/updates/36/$basearch/debug/
-metalink=https://mirrors.rpmfusion.org/metalink?repo=free-fedora-updates-released-debug-37&arch=$basearch
-enabled=0
-type=rpm-md
-gpgcheck=1
-repo_gpgcheck=0
-gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-free-fedora-37
-
-[rpmfusion-free-updates-source-37]
-name=RPM Fusion for Fedora 37 - Free - Updates Source
-#baseurl=http://download1.rpmfusion.org/free/fedora/updates/36/SRPMS/
-metalink=https://mirrors.rpmfusion.org/metalink?repo=free-fedora-updates-released-source-37&arch=$basearch
-enabled=0
-type=rpm-md
-gpgcheck=1
-repo_gpgcheck=0
-gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-free-fedora-37

rpmfusion.repo

@@ -0,0 +1,18 @@
+[rpmfusion-free]
+name=RPM Fusion for Fedora $releasever - Free
+#baseurl=http://download1.rpmfusion.org/free/fedora/releases/$releasever/Everything/$basearch/os/
+metalink=https://mirrors.rpmfusion.org/metalink?repo=free-fedora-34&arch=$basearch
+enabled=1
+metadata_expire=14d
+type=rpm-md
+gpgcheck=0
+
+[rpmfusion-free-updates]
+name=RPM Fusion for Fedora $releasever - Free - Updates
+#baseurl=http://download1.rpmfusion.org/free/fedora/updates/$releasever/$basearch/
+metalink=https://mirrors.rpmfusion.org/metalink?repo=free-fedora-updates-released-34&arch=$basearch
+enabled=1
+enabled_metadata=1
+type=rpm-md
+gpgcheck=0
+repo_gpgcheck=0

x13-gen1-sway-desktop.yaml

@@ -1,368 +0,0 @@
-ref: x13-gen1-sway-desktop-37
-rojig:
-  name: x13-gen1-sway-desktop-37
-  summary: "Thinkpad X13 Gen 1 Sway Desktop - Fedora 37"
-  license: MIT
-
-automatic_version_prefix: "37"
-mutate-os-release: "37"
-
-repos:
-  - fedora-37
-  - fedora-37-updates
-  - rpmfusion-free-37
-  - rpmfusion-free-updates-37
-  - copr:copr.fedorainfracloud.org:dawid:better_fonts
-  - copr:copr.fedorainfracloud.org:alebastr:sway-extras
-
-selinux: true
-documentation: true
-boot-location: modules
-etc-group-members:
-  - wheel
-tmp-is-dir: true
-
-postprocess-script: post.sh
-
-ignore-removed-users:
-  - root
-ignore-removed-groups:
-  - root
-check-passwd:
-  type: file
-  filename: passwd
-check-groups:
-  type: file
-  filename: group
-
-default_target: graphical.target
-
-packages:
-  - lvm2
-  - rpm-ostree
-# Container management
-  - buildah
-  - podman
-  - skopeo
-  - toolbox
-# Flatpak support
-  - flatpak
-  - xdg-desktop-portal
-  - glibc-devel
-  - kernel-devel
-  - elfutils-libelf-devel
-  - fedora-repos-ostree
-  - fedora-repos-archive
-# boot / hardware / drivers
-  - efibootmgr
-  - fwupd
-  - libva-intel-driver
-  - libva-intel-hybrid-driver
-  - mcelog
-  - microcode_ctl
-  - thermald
-  - thinkfan
-# base system
-  - biosdevname
-  - coreutils-common
-  - dbus-daemon
-  - device-mapper-multipath
-  - nvme-cli
-  - rng-tools
-# diagnostic / utils
-  - htop
-  - iotop
-  - lm_sensors
-  - lshw
-  - net-tools
-  - nmap-ncat
-  - powertop
-  - wireshark
-# alternative modern rust apps
-  - bat
-  - ripgrep
-# networking
-  - bridge-utils
-  - dhcpcd
-  - iwd
-  - NetworkManager
-  - network-manager-applet
-  - NetworkManager-bluetooth
-  - NetworkManager-config-connectivity-fedora
-  - NetworkManager-wifi
-  - NetworkManager-wwan
-# shell tools and development
-  - alacritty
-  - autoconf
-  - automake
-  - ctags
-  - emacs
-  - gettext-devel
-  - git
-  - intltool
-  - ipython3
-  - libtool
-  - make
-  - neovim
-  - patchutils
-  - squashfs-tools
-  - strace
-  - systemd-container
-  - vim-enhanced
-  - w3m
-  - zram-generator
-# fonts
-  - adobe-source-sans-pro-fonts
-  - bitstream-vera-fonts-all
-  - dejavu-sans-fonts
-  - dejavu-sans-mono-fonts
-  - dejavu-serif-fonts
-  - fontawesome-fonts
-  - fontawesome-fonts-web
-  - fontconfig
-  - fontconfig-enhanced-defaults
-  - google-noto-emoji-color-fonts
-  - google-noto-sans-gurmukhi-fonts
-  - google-noto-sans-sinhala-vf-fonts
-  - khmer-os-system-fonts
-  - langpacks-core-font-en
-  - liberation-mono-fonts
-  - liberation-sans-fonts
-  - liberation-serif-fonts
-  - lohit-assamese-fonts
-  - lohit-bengali-fonts
-  - lohit-devanagari-fonts
-  - lohit-gujarati-fonts
-  - lohit-kannada-fonts
-  - lohit-odia-fonts
-  - lohit-tamil-fonts
-  - lohit-telugu-fonts
-  - open-sans-fonts
-  - paktype-naskh-basic-fonts
-  - sil-abyssinica-fonts
-  - sil-mingzat-fonts
-  - sil-nuosu-fonts
-  - sil-padauk-fonts
-  - rit-meera-new-fonts
-  - terminus-fonts
-  - thai-scalable-waree-fonts
-  - ucs-miscfixed-opentype-fonts
-  - urw-base35-bookman-fonts
-  - urw-base35-c059-fonts
-  - urw-base35-d050000l-fonts
-  - urw-base35-fonts
-  - urw-base35-fonts-common
-  - urw-base35-gothic-fonts
-  - urw-base35-nimbus-mono-ps-fonts
-  - urw-base35-nimbus-roman-fonts
-  - urw-base35-nimbus-sans-fonts
-  - urw-base35-p052-fonts
-  - urw-base35-standard-symbols-ps-fonts
-  - urw-base35-z003-fonts
-# audio / video
-  - alsa-plugins-pulseaudio
-  - ffmpeg
-  - gstreamer1-libav
-  - gvfs-mtp
-  - libavdevice
-  - libva
-  - libva-utils
-  - pavucontrol
-  - pulseaudio-utils
-# misc
-  - feh
-  - okular
-# sway / wayland desktop
-  - brightnessctl
-  - cage
-  - greetd
-  - greetd-gtkgreet
-  - grim
-  - i3status-rs
-  - kanshi
-  - mako
-  - pinentry-qt
-  - slurp
-  - sway
-  - swayidle
-  - swaylock
-  - waybar
-  - wayland-devel
-  - wdisplays
-  - wl-clipboard
-  - wldash
-  - xdg-desktop-portal-wlr
-# virtualization
-  - libguestfs-tools
-  - libvirt-daemon-config-network
-  - libvirt-daemon-kvm
-  - python-libguestfs
-  - qemu-img
-  - qemu-kvm
-  - qemu-system-x86-core
-  - qemu-ui-sdl
-  - virt-install
-  - virt-manager
-  - virt-top
-  - virt-viewer
-# comps-sync
-  - abattis-cantarell-fonts
-  - acl
-  - alsa-sof-firmware
-  - alsa-ucm
-  - alsa-utils
-  - attr
-  - audit
-  - b43-fwcutter
-  - b43-openfwwf
-  - basesystem
-  - bash
-  - bash-completion
-  - bc
-  - bind-utils
-  - bzip2
-  - colord
-  - compsize
-  - coreutils
-  - cpio
-  - cryptsetup
-  - curl
-  - dhcp-client
-  - dnsmasq
-  - e2fsprogs
-  - ethtool
-  - exfatprogs
-  - fedora-repos-modular
-  - file
-  - filesystem
-  - firefox
-  - firewalld
-  - glibc
-  - glibc-all-langpacks
-  - glx-utils
-  - gnupg2
-  - gstreamer1-plugins-bad-free
-  - gstreamer1-plugins-good
-  - gstreamer1-plugins-ugly-free
-  - hostname
-  - hunspell
-  - ibus-anthy
-  - ibus-gtk3
-  - ibus-hangul
-  - ibus-libpinyin
-  - ibus-libzhuyin
-  - ibus-m17n
-  - ibus-typing-booster
-  - iproute
-  - iptables-nft
-  - iptstate
-  - iputils
-  - iwl7260-firmware
-  - jomolhari-fonts
-  - kbd
-  - kernel
-  - kernel-modules-extra
-  - less
-  - libertas-sd8686-firmware
-  - libertas-sd8787-firmware
-  - libertas-usb8388-firmware
-  - linux-firmware
-  - logrotate
-  - lsof
-  - man-db
-  - man-pages
-  - mdadm
-  - mesa-dri-drivers
-  - mesa-vulkan-drivers
-  - mlocate
-  - mtr
-  - nfs-utils
-  - nss-altfiles
-  - nss-mdns
-  - opensc
-  - openssh-clients
-  - openssh-server
-  - pam_afs_session
-  - passwd
-  - passwdqc
-  - pciutils
-  - pinfo
-  - pipewire-alsa
-  - pipewire-gstreamer
-  - pipewire-pulseaudio
-  - pipewire-utils
-  - plymouth
-  - plymouth-system-theme
-  - policycoreutils
-  - policycoreutils-python-utils
-  - procps-ng
-  - psmisc
-  - qemu-guest-agent
-  - qt5-qtbase
-  - qt5-qtbase-gui
-  - qt5-qtdeclarative
-  - qt5-qtxmlpatterns
-  - quota
-  - rootfiles
-  - rpm
-  - rsync
-  - selinux-policy-targeted
-  - setup
-  - shadow-utils
-  - sos
-  - spice-vdagent
-  - sssd
-  - sssd-common
-  - sssd-kcm
-  - stix-fonts
-  - sudo
-  - systemd
-  - systemd-oomd-defaults
-  - systemd-resolved
-  - systemd-udev
-  - tar
-  - time
-  - tree
-  - unzip
-  - uresourced
-  - usb_modeswitch
-  - usbutils
-  - util-linux
-  - wget
-  - which
-  - wireplumber
-  - words
-  - wpa_supplicant
-  - zip
-  - zram-generator-defaults
-
-# Make sure the following are not pulled in when Recommended by other packages
-exclude-packages:
-  - PackageKit
-  # We can not include openh264. See https://fedoraproject.org/wiki/OpenH264
-  - gstreamer1-plugin-openh264
-  - mozilla-openh264
-  - openh264
-  - xdg-desktop-portal-gtk
-
-add-files:
-  - ["config/systemd/mako.service", "/etc/systemd/user/mako.service"]
-  - ["config/systemd/nm-applet.service", "/etc/systemd/user/nm-applet.service"]
-  - ["config/systemd/swayidle.service", "/etc/systemd/user/swayidle.service"]
-  - ["config/systemd/swaylock.service", "/etc/systemd/user/swaylock.service"]
-  - ["config/environment.d/wayland.conf", "/etc/environment.d/wayland.conf"]
-  - ["config/greetd/config.toml", "/etc/greetd/config.toml"]
-  - ["config/sway/config", "/etc/sway/config"]
-  - ["config/sway/config.d/10-variables.conf", "/etc/sway/config.d/10-variables.conf"]
-  - ["config/sway/config.d/20-output.conf", "/etc/sway/config.d/20-output.conf"]
-  - ["config/sway/config.d/30-input.conf", "/etc/sway/config.d/30-input.conf"]
-  - ["config/sway/config.d/50-style.conf", "/etc/sway/config.d/50-style.conf"]
-  - ["config/sway/config.d/60-app-windows.conf", "/etc/sway/config.d/60-app-windows.conf"]
-  - ["config/sway/config.d/90-bindings.conf", "/etc/sway/config.d/90-bindings.conf"]
-  - ["config/sway/config.d/91-swaysome.conf", "/etc/sway/config.d/91-swaysome.conf"]
-  - ["config/sway/config.d/99-startup.conf", "/etc/sway/config.d/99-startup.conf"]
-  - ["config/sway/bin/keyboard-layout-per-window.py", "/usr/bin/keyboard-layout-per-window.py"]
-  - ["config/waybar/config", "/etc/xdg/waybar/config"]
-  - ["config/waybar/style.css", "/etc/xdg/waybar/style.css"]
-  - ["config/waybar/keyboard-layout.py", "/etc/xdg/waybar/keyboard-layout.py"]
-  - ["config/wldash.yaml", "/usr/share/wldash/config.yaml"]