e-bike-tracker/e-bike-tracker-device
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

connect to gprs and check if attached

Browse source
This commit is contained in:
Vladan Popovic 2022-06-18 01:39:38 +02:00
parent 1cb8a90caf
commit 94b9ce312f
3 changed files with 189 additions and 122 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

168
src/command.rs
View file

@ -3,215 +3,231 @@ use std::time::Duration;
pub struct Command {
pub text: String,
pub timeout: Duration,
pub ends_with: Option<String>,
pub contains: Option<String>,
}
impl Command {
pub fn initgprs() -> Command {
Command {
text: "AT+SAPBR=3,1,\"Contype\",\"GPRS\"".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "AT+SAPBR=3,1,\"Contype\",\"GPRS\"".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn modeminfo() -> Command {
Command {
text: "ATI".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "ATI".to_string(),
timeout: Duration::from_millis(6000),
contains: Some("+CIEV".to_string()),
}
}
pub fn fwrevision() -> Command {
Command {
text: "AT+CGMR".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "AT+CGMR".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn battery() -> Command {
Command {
text: "AT+CBC".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "AT+CBC".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn scan() -> Command {
Command {
text: "AT+COPS=?".to_owned(),
timeout: Duration::from_millis(60),
ends_with: Some("OK".to_owned()),
text: "AT+COPS=?".to_string(),
timeout: Duration::from_millis(60000),
contains: Some("OK".to_string()),
}
}
pub fn network() -> Command {
Command {
text: "AT+COPS?".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "AT+COPS?".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn signal() -> Command {
Command {
text: "AT+CSQ".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "AT+CSQ".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn checkreg() -> Command {
Command {
text: "AT+CREG?".to_owned(),
timeout: Duration::from_millis(3),
ends_with: None,
text: "AT+CREG?".to_string(),
timeout: Duration::from_millis(3000),
contains: None,
}
}
pub fn opengprs() -> Command {
Command {
text: "AT+SAPBR=1,1".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "AT+SAPBR=1,1".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn getbear() -> Command {
Command {
text: "AT+SAPBR=2,1".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "AT+SAPBR=2,1".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn inithttp() -> Command {
Command {
text: "AT+HTTPINIT".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "AT+HTTPINIT".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn sethttp() -> Command {
Command {
text: "AT+HTTPPARA=\"CID\",1".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "AT+HTTPPARA=\"CID\",1".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn checkssl() -> Command {
Command {
text: "AT+CIPSSL=?".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "AT+CIPSSL=?".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn enablessl() -> Command {
Command {
text: "AT+HTTPSSL=1".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "AT+HTTPSSL=1".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn disablessl() -> Command {
Command {
text: "AT+HTTPSSL=0".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "AT+HTTPSSL=0".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn initurl() -> Command {
Command {
text: "AT+HTTPPARA=\"URL\",\"{}\"".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "AT+HTTPPARA=\"URL\",\"{}\"".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn doget() -> Command {
Command {
text: "AT+HTTPACTION=0".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("+HTTPACTION".to_owned()),
text: "AT+HTTPACTION=0".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("+HTTPACTION".to_string()),
}
}
pub fn setcontent() -> Command {
Command {
text: "AT+HTTPPARA=\"CONTENT\",\"{}\"".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "AT+HTTPPARA=\"CONTENT\",\"{}\"".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn postlen() -> Command {
Command {
text: "AT+HTTPDATA={}5000".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("DOWNLOAD".to_owned()),
text: "AT+HTTPDATA={}5000".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("DOWNLOAD".to_string()),
}
}
pub fn dopost() -> Command {
Command {
text: "AT+HTTPACTION=1".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("+HTTPACTION".to_owned()),
text: "AT+HTTPACTION=1".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("+HTTPACTION".to_string()),
}
}
pub fn getdata() -> Command {
Command {
text: "AT+HTTPREAD".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "AT+HTTPREAD".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn closehttp() -> Command {
Command {
text: "AT+HTTPTERM".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "AT+HTTPTERM".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn closebear() -> Command {
Command {
text: "AT+SAPBR=0,1".to_owned(),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
text: "AT+SAPBR=0,1".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn setapn(apn: &str) -> Command {
Command {
text: format!("AT+SAPBR=3,1,\"APN\",\"{}\"", apn),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn setuser(user: &str) -> Command {
Command {
text: format!("AT+SAPBR=3,1,\"USER\",\"{}\"", user),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn setpwd(password: &str) -> Command {
Command {
text: format!("AT+SAPBR=3,1,\"PWD\",\"{}\"", password),
timeout: Duration::from_millis(3),
ends_with: Some("OK".to_owned()),
timeout: Duration::from_millis(3000),
contains: Some("OK".to_string()),
}
}
pub fn probe() -> Command {
Command {
text: "AT".to_string(),
timeout: Duration::from_millis(3000),
contains: Some("+CIEV".to_string()),
}
}
pub fn is_gprs_attached() -> Command {
Command {
text: "AT+CGATT?".to_string(),
timeout: Duration::from_millis(1000),
contains: Some("OK".to_string()),
}
}
}

10
src/main.rs
View file

@ -7,6 +7,10 @@ use anyhow;
use esp_idf_hal::prelude::*;
use esp_idf_hal::peripherals::Peripherals;
use esp_idf_hal::serial;
use std::time::Duration;
use std::thread;
use std::sync::mpsc::{channel, Receiver, Sender};
fn main() -> anyhow::Result<()> {
esp_idf_sys::link_patches();
@ -38,16 +42,18 @@ fn main() -> anyhow::Result<()> {
let modem_power = dp.pins.gpio23.into_output().unwrap();
modem::init(modem_pwrkey, modem_rst, modem_power)?;
let (tx, rx) = serial.split();
let mut mdm = modem::Modem::new(tx, rx);
let _ = mdm.modem_info()?;
let _ = mdm.probe()?;
let _ = mdm.connect_to_gprs_ap(
config::A1_GPRS_AP.apn,
config::A1_GPRS_AP.username,
config::A1_GPRS_AP.password,
)?;
if mdm.is_gprs_attached()? {
println!("GPRS ATTACHEEEDDDDDDDDD!!!!!!!!!!!!!!!1");
}
Ok(())
}

133
src/modem.rs
View file

@ -1,18 +1,19 @@
use crate::command::Command;
use std::iter::FromIterator;
use std::thread;
use std::io::{Error as IoError, ErrorKind, BufRead};
use std::error::Error;
use std::time::{Duration, Instant};
use embedded_hal::serial::{Read, Write};
use embedded_hal::digital::v2::OutputPin;
use esp_idf_hal::serial::{self, Rx, Tx};
use esp_idf_hal::serial::{self, Rx, Tx, SerialError};
pub type Result<T> = std::result::Result<T, ModemError>;
pub struct Modem<UART: serial::Uart> {
is_connected: bool,
rx: Rx<UART>,
rx: MyRx<UART>,
tx: Tx<UART>,
}
@ -20,6 +21,7 @@ pub struct Modem<UART: serial::Uart> {
pub enum ModemError {
CommandError(String),
SetupError(String),
TimeoutError,
}
impl Error for ModemError {}
@ -30,13 +32,39 @@ impl std::fmt::Display for ModemError {
}
}
pub type Result<T> = std::result::Result<T, ModemError>;
struct MyRx<UART: serial::Uart>(Rx<UART>);
impl<UART: serial::Uart> MyRx<UART> {
fn read(&mut self) -> nb::Result<u8, SerialError> {
self.0.read()
}
fn read_blocking(&mut self) -> std::result::Result<u8, SerialError> {
nb::block!(self.read())
}
}
impl<UART: serial::Uart> std::io::Read for MyRx<UART> {
fn read(&mut self, buf: &mut [u8]) -> std::io::Result<usize> {
let mut read_bytes: usize = 0;
loop {
let b = self.read_blocking()
.map_err(|err| IoError::new(ErrorKind::Other, format!("Serial error {:?}", err)))?;
buf[read_bytes] = b;
read_bytes += 1;
if b == '\0' as u8 || b == '\n' as u8 {
break;
}
};
Ok(read_bytes)
}
}
impl<UART: serial::Uart> Modem<UART> {
pub fn new(tx: Tx<UART>, rx: Rx<UART>) -> Self {
Self {
is_connected: false,
rx,
rx: MyRx(rx),
tx,
}
}
@ -51,69 +79,86 @@ impl<UART: serial::Uart> Modem<UART> {
/// It's ok to use this function like this for now because the write/read cycle is blocking,
/// hence the case where multiple writes happen asynchronously isn't handled. See
/// [send_command](crate::modem::Modem::send_command) for more info on the blocking part.
fn read_response(&mut self, expected: Option<String>, timeout: Duration) -> Result<String> {
let len = self.rx.count()
.map_err(|_| ModemError::CommandError("Error getting RX fifo length".to_owned()))?;
println!("Reading {} bytes from serial RX ...", len);
fn read_response(&mut self, contains: Option<String>, timeout: Duration) -> Result<String> {
let mut response = String::new();
let now = Instant::now();
let match_text: String = contains.unwrap_or("".to_string());
let mut reader = std::io::BufReader::new(&mut self.rx);
loop {
let len = self.rx.count().unwrap();
if len == 0 {
let mut line = String::new();
reader.read_line(&mut line)
.map_err(|err| ModemError::CommandError(format!("read line failed: {}", err)))?;
println!("Read {} from serial ...", line.trim());
// check if empty first because it's much simpler and more frequent
if line == "" {
if now + timeout > Instant::now() {
return Err(ModemError::TimeoutError);
}
thread::sleep(Duration::from_millis(1000));
continue;
} else {
response.push_str(&line);
if line.contains(&match_text) {
println!("Found match {} for line {} ... exiting response reader now!", match_text, line);
println!("-----------------------------------------------------------");
break;
}
thread::sleep(Duration::from_secs(1));
continue;
}
println!("Reading {} bytes from serial RX ...", len);
for _ in 0..len {
nb::block!(self.rx.read())
.map(|b| response.push(b as char))
.map_err(|_| ModemError::CommandError("Error reading from RX".to_owned()))?;
}
}
let response = response.trim();
println!("Received: {}", response);
expected.map(|expected_end| {
if response.ends_with(&expected_end) {
Ok(response.to_owned())
} else {
let res = String::from_iter(response.chars().rev().take(expected_end.len()));
Err(ModemError::CommandError(format!("Got invalid response end {} instead of expected {}", res, expected_end)))
}
}).unwrap_or(Ok(response.to_owned()))
Ok(response.to_string())
}
fn send_command(&mut self, cmd: Command) -> Result<String> {
for b in cmd.text.as_bytes().iter() {
nb::block!(self.tx.write(*b)).map_err(|_| ModemError::CommandError("error writing to serial".to_owned()))?;
nb::block!(self.tx.write(*b)).map_err(|_| ModemError::CommandError("error writing to serial".to_string()))?;
}
self.read_response(cmd.ends_with, cmd.timeout)
nb::block!(self.tx.write('\r' as u8)).map_err(|_| ModemError::CommandError("error writing <CR> to serial".to_string()))?;
self.read_response(cmd.contains.clone(), cmd.timeout.clone())
}
pub fn get_ip_addr(&mut self) -> Result<String> {
println!("getting ip addres ...");
let res = self.send_command(Command::getbear())?;
println!("{}", res);
Ok(res)
}
pub fn connect_to_gprs_ap(&mut self, apn: &str, username: &str, password: &str)-> Result<()> {
println!("init gprs ...");
let _ = self.send_command(Command::initgprs())?;
println!("connecting to {} with {}:{}", apn, username, password);
let _ = self.send_command(Command::setapn(apn))?;
let _ = self.send_command(Command::setuser(username))?;
let _ = self.send_command(Command::setpwd(password))?;
let _ = self.send_command(Command::opengprs())?;
println!("open gprs ...");
let _ = self.send_command(Command::initgprs())?;
self.is_connected = true;
Ok(())
}
pub fn modem_info(&mut self)-> Result<String> {
println!("testing modem with AP command");
pub fn info(&mut self)-> Result<String> {
println!("getting modem info with API command");
self.send_command(Command::modeminfo())
}
pub fn probe(&mut self)-> Result<String> {
println!("probing modem with AP command");
self.send_command(Command::probe())
}
pub fn is_gprs_attached(&mut self)-> Result<bool> {
println!("testing gprs connection ...");
let res = self.send_command(Command::is_gprs_attached())?;
Ok(res.contains("+CGATT: 1"))
}
}
/// Initialize the modem (sim800l in this case). The initialization process sets all pins in the
@ -133,14 +178,14 @@ impl<UART: serial::Uart> Modem<UART> {
/// ```
pub fn init(mut pwrkey: impl OutputPin, mut rst: impl OutputPin, mut power: impl OutputPin) -> Result<()> {
println!("Turning SIM800L on ...");
power.set_high().map_err(|_| ModemError::SetupError("Error setting POWER to high.".to_owned()))?;
rst.set_high().map_err(|_| ModemError::SetupError("Error setting RST to high.".to_owned()))?;
power.set_high().map_err(|_| ModemError::SetupError("Error setting POWER to high.".to_string()))?;
rst.set_high().map_err(|_| ModemError::SetupError("Error setting RST to high.".to_string()))?;
// Pull down PWRKEY for more than 1 second according to manual requirements
pwrkey.set_high().map_err(|_| ModemError::SetupError("Error setting PWRKEY to high.".to_owned()))?;
pwrkey.set_high().map_err(|_| ModemError::SetupError("Error setting PWRKEY to high.".to_string()))?;
thread::sleep(Duration::from_millis(100));
pwrkey.set_low().map_err(|_| ModemError::SetupError("Error setting PWRKEY to low.".to_owned()))?;
pwrkey.set_low().map_err(|_| ModemError::SetupError("Error setting PWRKEY to low.".to_string()))?;
thread::sleep(Duration::from_millis(1000));
pwrkey.set_high().map_err(|_| ModemError::SetupError("Error setting PWRKEY to high.".to_owned()))?;
pwrkey.set_high().map_err(|_| ModemError::SetupError("Error setting PWRKEY to high.".to_string()))?;
println!("Waiting 3s for sim module to come online ...");
thread::sleep(Duration::from_millis(3000));
Ok(())