clear Rx buffer before TCP connect

and ofc some other things too :)

Cargo.toml

@@ -19,7 +19,7 @@ esp-idf-hal = "0.37.4"
 esp-idf-sys = { version = "0.31.5", features = ["binstart", "native"] }
 mqtt-protocol = "0.11.2"
 nb = "1.0.0"
-ublox = { git = "https://github.com/lkolbly/ublox.git", branch = "master" }
+ublox = "0.4.2"
 
 [build-dependencies]
 embuild = "0.29"

src/gps.rs

@@ -126,7 +126,7 @@ pub fn main<T: Sync + Send>(
                 mode: UartMode::new(DataBits::Eight, Parity::None, StopBits::One),
                 baud_rate: 9600,
                 in_proto_mask: InProtoMask::all(),
-                out_proto_mask: OutProtoMask::UBLOX,
+                out_proto_mask: OutProtoMask::UBOX,
                 flags: 0,
                 reserved5: 0,
             }

src/main.rs

@@ -2,7 +2,6 @@ mod accel;
 mod config;
 #[allow(dead_code)]
 mod command;
-mod gps;
 mod modem;
 mod serial;
 mod types;
@@ -43,7 +42,7 @@ fn main() -> anyhow::Result<()> {
 
     // let _ = gps::main(gps_tx, gps_rx, gps_uart, gps_sender)?;
     // threads.push(thread::spawn(move || gps::main(gps_rx, gps_tx, gps_uart, gps_sender)));
-    //thread::sleep(Duration::from_millis(1000));
+    thread::sleep(Duration::from_millis(1000));
     threads.push(thread::spawn(move || accel::main(accel_sender)));
 
     let _ = modem::main(modem_rx, modem_tx, modem_uart, modem_pwrkey, modem_rst, modem_power, receiver)?;

src/modem.rs

@@ -67,10 +67,10 @@ impl<UART: serial::Uart> Modem<UART> {
     pub fn init(&mut self, mut pwrkey: impl OutputPin, mut rst: impl OutputPin, mut power: impl OutputPin) -> Result<()> {
         println!("Turning SIM800L on ...");
         power.set_high().map_err(|_| ModemError::SetupError("Error setting POWER to high.".to_string()))?;
-        rst.set_high().map_err(|_| ModemError::SetupError("Error setting RST to high.".to_string()))?;
+        //rst.set_high().map_err(|_| ModemError::SetupError("Error setting RST to high.".to_string()))?;
         // Pull down PWRKEY for more than 1 second according to manual requirements
         pwrkey.set_high().map_err(|_| ModemError::SetupError("Error setting PWRKEY to high.".to_string()))?;
-        thread::sleep(Duration::from_millis(100));
+        thread::sleep(Duration::from_millis(1500));
         pwrkey.set_low().map_err(|_| ModemError::SetupError("Error setting PWRKEY to low.".to_string()))?;
         thread::sleep(Duration::from_millis(1000));
         pwrkey.set_high().map_err(|_| ModemError::SetupError("Error setting PWRKEY to high.".to_string()))?;
@@ -122,14 +122,24 @@ impl<UART: serial::Uart> Modem<UART> {
     }
 
     fn send_command(&mut self, cmd: Command) -> Result<String> {
+        if let Some(contains) = cmd.contains {
+            self.send(&cmd.text, &contains)
+        } else {
+            self.send(&cmd.text, "")
+        }
+    }
+
+    fn send(&mut self, at_command: &str, contains: &str) -> Result<String> {
         println!("-----------------------------------------------------------");
-        println!("Sending {} ...", cmd.text);
+        println!("Sending {} ...", at_command);
 
         let _ = nb::block!(self.serial
-            .write_bytes(&[cmd.text.as_bytes(), &['\r' as u8]].concat()))
+            .write_bytes(&[at_command.as_bytes(), &['\r' as u8]].concat()))
-            .map_err(|_| ModemError::SendDataError(format!("Error in send_command({})", cmd.text)))?;
+            .map_err(|_| ModemError::SendDataError(format!("Error in send_command({})", at_command)))?;
 
-        self.command_read_response(cmd.contains)
+        let contains_opt = if contains == "" { None } else { Some(contains.to_string()) };
+
+        self.command_read_response(contains_opt)
     }
 
     fn handle_prompt(&mut self) -> Result<()> {
@@ -247,7 +257,8 @@ impl<UART: serial::Uart> Modem<UART> {
     }
 
     pub fn tcp_connect(&mut self, addr: &str, port: u16) -> Result<()> {
-        let _ = self.send_command(Command::tcp_connect(addr, port))?;
+        let at_command = format!("AT+CIPSTART=\"TCP\",\"{}\",\"{}\"", addr, port);
+        let _ = self.send(&at_command, "CONNECT OK");
         for _ in 0..3 {
             if let Ok(reply) = self.command_read_response(Some("CONNECT OK".to_string())) {
                 println!("TCP connect replied with {}", reply);
@@ -515,6 +526,9 @@ pub fn main<T: Sync + Send>(
     //let _ = mdm.ssl_set_client_cert(client_cert_path, "t")?;
     //let _ = mdm.fs_list("C:\\USER\\")?;
 
+    // Retry 5 times to open a TCP connection, otherwise fail and wait for reboot.
+    let mut retries = 0;
+
     loop {
         if !mdm.is_gprs_attached()? {
             let _ = mdm.gprs_attach_ap(
@@ -526,13 +540,21 @@ pub fn main<T: Sync + Send>(
         if let Ok(()) = mdm.try_connect_gprs() {
             let device_id = "c36a72df-5bd6-4f9b-995d-059433bc3267";
 
-            let _ = mdm.tcp_set_quick_mode(false);
+            // When command AT+CIPQSEND=0, it is in normal sending mode. In this mode, after user
-            let _ = mdm.tcp_set_manual_receive(true);
+            // sends data by AT+CIPSEND, if the server receives TCP data, it will give ACK message
+            // to module, and the module will respond SEND OK.
+            let _ = mdm.send("AT+CIPQSEND=0", "OK");
+            // Enables getting data from network manually.
+            let _ = mdm.send("AT+CIPRXGET=1", "OK");
 
             if let Err(_) = mdm.tcp_connect("51.158.66.64", 7887) {
-                continue;
+                if retries < 5 {
+                    retries += 1;
+                    continue;
+                }
             }
-            thread::sleep(Duration::from_secs(1));
+            thread::sleep(Duration::from_millis(500));
+            mdm.serial.clear();
 
             let _ = mdm.mqtt_connect(device_id)?;
 
@@ -551,7 +573,7 @@ pub fn main<T: Sync + Send>(
                         err_count = 0;
                     }
                     Err(e) => {
-                        if err_count < 10 {
+                        if err_count < 5 {
                             err_count += 1;
                             println!("received error {} | NOT sending to mqtt ...", e);
                         }
@@ -561,7 +583,6 @@ pub fn main<T: Sync + Send>(
                     }
                 }
             };
-
             let _ = mdm.tcp_close_connection()?;
         }
     }

src/serial.rs

@@ -54,7 +54,7 @@ impl<UART: serial::Uart> SerialIO<UART> {
         }
     }
 
-    fn read_bytes(&mut self, buf: &mut [u8]) -> Result<usize> {
+    pub fn read_bytes(&mut self, buf: &mut [u8]) -> Result<usize> {
         let mut started_reading = false;
         let mut count = 0;
         let mut retries = 0;
@@ -85,6 +85,27 @@ impl<UART: serial::Uart> SerialIO<UART> {
             Err(nb::Error::Other(SerialError::ReadError("Rx buffer empty.".to_string())))
         }
     }
+
+    pub fn clear(&mut self) {
+        let mut started_reading = false;
+        let mut retries = 0;
+
+        loop {
+            match self.rx.read() {
+                Ok(_) => {
+                    started_reading = true;
+                },
+                Err(nb::Error::WouldBlock) => {
+                    if started_reading || retries > READ_MAX_RETRIES { break; }
+                    else {
+                        thread::sleep(Duration::from_millis(READ_WAIT_TIME));
+                        retries += 1;
+                    }
+                },
+                Err(nb::Error::Other(err)) => println!("Serial read error :: {:?}", err),
+            }
+        }
+    }
 }
 
 impl<UART: serial::Uart> io::Read for SerialIO<UART> {