98d0a66cf3
debug and fix a bunch of modem read/write errors
2022-11-30 00:26:44 +01:00
018af71262
make serial read/write non-blocking
2022-11-29 15:47:57 +01:00
b6e7e64e72
refactor and make mqtt work
2022-11-26 18:59:33 +01:00
e42302988a
derive Debug for commands
2022-11-26 18:58:30 +01:00
f7f0689f46
add a todo for sim800l response parsing
2022-08-08 12:54:29 +02:00
41e89028e9
map to () instead of ? ... Ok(())
2022-07-21 16:25:47 +02:00
78df516fba
send received messages via mqtt in modem main
2022-07-20 13:32:58 +02:00
23ff182b65
use same interface in gps as in gsm modem
2022-07-20 12:33:11 +02:00
63359cc4c0
TODO: handle reading lines in a bettwr way
2022-07-20 12:27:42 +02:00
db3cd1548e
match payload v.s. sent bytes length in Serial::send_bytes
2022-07-20 12:20:24 +02:00
a01b6d3a7b
decrease gps rate
2022-07-12 19:11:29 +02:00
545fa95f17
copy-paste ublox serial config and reading
2022-07-12 19:10:04 +02:00
6f90f46b68
move common serial io code to a module
...
closes : #6
closes : #7
2022-07-12 19:09:04 +02:00
1fc1218ba6
initial gps read/write and publish
2022-07-11 16:17:17 +02:00
df46a56cc3
send Movement from accel main thread
2022-07-11 16:16:30 +02:00
7bfd37b799
working threads with mpsc::channel
2022-07-06 20:33:43 +02:00
d023f5db76
mqtt works ... connect + publish
2022-07-04 17:04:09 +02:00
a215c628a7
http post - not working because sim800l supports tlsv1.0 only
2022-07-03 02:27:36 +02:00
edf427dcb1
mqtt continues
2022-06-26 00:56:59 +02:00
8d7d4d898d
initial mqtt connect
2022-06-25 18:35:35 +02:00
a4c8d03eb9
rename payload to response in response size parsing
2022-06-25 18:33:43 +02:00
bc495a7592
use &[u8] instead of &str
2022-06-25 18:31:43 +02:00
1ea0bf62e5
misc + implement tcp receive in buffer
...
needed for the TcpClientStack in minimq
2022-06-24 00:28:25 +02:00
481805a1d1
turning quick mode off also works
2022-06-23 02:18:44 +02:00
6ce84ddfff
read tcp replies from server
2022-06-23 02:11:44 +02:00
4842f18b34
read the TCP reply length and return a number
2022-06-22 14:37:55 +02:00
327c86a504
fix bug in timeout handling
...
use timeout.saturating_sub instead of plain '-'
2022-06-22 14:35:18 +02:00
f0d474d062
use Duration::ZERO when reading times out
2022-06-22 14:34:09 +02:00
10c61f5d78
read reply from tcp server
2022-06-21 02:30:00 +02:00
55e5b0dc96
rename IterableRx to RxIter
2022-06-21 01:27:27 +02:00
5a190e4890
move read_line to IterableRx, improve read_response
2022-06-21 00:37:15 +02:00
626c47c58f
read_line now returns String instead of Result<string>
...
maybe a worse interface than before ... will be revisited
2022-06-20 17:02:42 +02:00
a408544e4e
fix timeout handling
...
was accumulative by mistake, now it's flat incremental
2022-06-20 16:57:23 +02:00
172bdead14
do a basic AT probe instead of waiting on startup
2022-06-20 01:38:50 +02:00
fccbf98155
restore the received message (including \r\n in the end)
2022-06-20 00:44:51 +02:00
858129cc82
remove unused modem methods
2022-06-20 00:13:47 +02:00
84ab94df46
refactor sending data to remote server
...
works as expected now, but far from perfect
2022-06-20 00:12:55 +02:00
4fefd547d1
remove \r\n from the end of the rx buffer
...
may be a bad idea and should be revisited
2022-06-20 00:10:20 +02:00
835bf50b80
use saturating sub for timeouts, it overflowed at some point
2022-06-20 00:08:52 +02:00
f7070e02e7
remove prints in uart Iterator impl
2022-06-20 00:05:57 +02:00
fac3115a93
add tcp send/receive command modes
2022-06-20 00:03:44 +02:00
08c5cabe6d
implement iterator on reader (serial rx)
2022-06-19 03:18:21 +02:00
792eef13ba
implement non-blocking read with timeout
...
much better than before :)
2022-06-19 00:33:32 +02:00
94b9ce312f
connect to gprs and check if attached
2022-06-18 01:39:38 +02:00
1cb8a90caf
remove mut from examples in modem::init
2022-06-16 01:43:28 +02:00
17b54fbe3a
remove all unwraps :)
2022-06-16 01:39:16 +02:00
43424ba997
implement commands and turn everything on
...
Turn the modem on by setting appropriate pins to high/low.
Implemented all commands from
https://github.com/pythings/Drivers/blob/master/SIM800L.py#L116-L143 in Rust.
Moved AP values to a config module. Maybe create a build environment for this
later on, we'll need to support multiple telecom providers for sure ...
Fix the write/read implementation for the Serial. Match on end and handle the
timeout properly for every command.
2022-06-16 01:09:31 +02:00
737e29f108
RADI RADNJA!!
2022-06-16 01:05:31 +02:00
e3c3aa7391
implement modem on a Read/Write structure (rx, tx)
2022-06-12 12:02:59 +02:00
fbe132295e
dummy gprs connect with error handling
2022-06-11 16:49:16 +02:00
