tests with embassy

This commit is contained in:
Vladan Popovic 2023-09-25 23:51:30 +02:00
parent dc5f90af49
commit 9e2dee4926
2 changed files with 48 additions and 56 deletions

View File

@ -8,11 +8,12 @@ use esp_backtrace as _;
use esp_println::println; use esp_println::println;
use hal::{ use hal::{
clock::ClockControl, clock::ClockControl,
Delay,
embassy::{self, executor::Executor}, embassy::{self, executor::Executor},
gpio::IO, gpio::IO,
interrupt, peripherals::{Peripherals, UART1},
peripherals::{Peripherals, Interrupt, UART1},
prelude::*, prelude::*,
prelude::entry,
timer::TimerGroup, timer::TimerGroup,
Uart, Uart,
uart::{ uart::{
@ -27,8 +28,16 @@ use hal::{
}; };
use esp_hal_common::{UartRx, UartTx}; use esp_hal_common::{UartRx, UartTx};
use atat::{asynch::AtatClient, AtatIngress, Buffers, DefaultDigester, Ingress}; use atat::{
use heapless::Vec; asynch::{
AtatClient,
Client,
},
AtatIngress,
Buffers,
DefaultDigester,
Ingress,
};
use static_cell::StaticCell; use static_cell::StaticCell;
const READ_BUF_SIZE: usize = 64; const READ_BUF_SIZE: usize = 64;
@ -37,27 +46,24 @@ const URC_CAPACITY: usize = 128;
const URC_SUBSCRIBERS: usize = 3; const URC_SUBSCRIBERS: usize = 3;
#[embassy_executor::task] #[embassy_executor::task]
async fn reader(mut rx: UartRx<'static, UART1>) { async fn ingress_task(
esp_println::println!("reading..."); mut ingress: Ingress<
// max message size to receive 'static,
// leave some extra space for AT-CMD characters DefaultDigester<modem::Urc>,
const MAX_BUFFER_SIZE: usize = 10 * READ_BUF_SIZE + 16; modem::Urc,
INGRESS_BUF_SIZE,
let mut rbuf: Vec<u8, MAX_BUFFER_SIZE> = Vec::new(); URC_CAPACITY,
let mut offset = 0; URC_SUBSCRIBERS,
while let Ok(len) = embedded_io_async::Read::read(&mut rx, &mut rbuf[offset..]).await { >,
offset += len; mut rx: UartRx<'static, UART1>) {
if offset == 0 { println!("reading in ingress_task...");
rbuf.truncate(0); ingress.read_from(&mut rx).await;
break; }
}
// if set_at_cmd is used than stop reading
if len < READ_BUF_SIZE {
rbuf.truncate(offset);
break;
}
}
#[embassy_executor::task]
async fn test_send(mut client: Client<'static, UartTx<'static, UART1>, INGRESS_BUF_SIZE>) {
println!("sending a single message (GetManufacturerId)");
client.send(&modem::GetManufacturerId).await.ok();
} }
#[entry] #[entry]
@ -65,6 +71,7 @@ fn main() -> ! {
let peripherals = Peripherals::take(); let peripherals = Peripherals::take();
let mut system = peripherals.DPORT.split(); let mut system = peripherals.DPORT.split();
let clocks = ClockControl::boot_defaults(system.clock_control).freeze(); let clocks = ClockControl::boot_defaults(system.clock_control).freeze();
let mut delay = Delay::new(&clocks);
let timer_group0 = TimerGroup::new( let timer_group0 = TimerGroup::new(
peripherals.TIMG0, peripherals.TIMG0,
@ -80,6 +87,11 @@ fn main() -> ! {
let mut power = io.pins.gpio4.into_push_pull_output(); let mut power = io.pins.gpio4.into_push_pull_output();
power.set_high().ok(); power.set_high().ok();
for i in 0..15 {
println!("waiting {} seconds ...", 15 - i);
delay.delay_ms(1000u32);
}
let modem_uart_pins = TxRxPins::new_tx_rx( let modem_uart_pins = TxRxPins::new_tx_rx(
io.pins.gpio26.into_push_pull_output(), io.pins.gpio26.into_push_pull_output(),
io.pins.gpio27.into_floating_input(), io.pins.gpio27.into_floating_input(),
@ -107,18 +119,24 @@ fn main() -> ! {
static BUFFERS: Buffers<modem::Urc, INGRESS_BUF_SIZE, URC_CAPACITY, URC_SUBSCRIBERS> = static BUFFERS: Buffers<modem::Urc, INGRESS_BUF_SIZE, URC_CAPACITY, URC_SUBSCRIBERS> =
Buffers::<modem::Urc, INGRESS_BUF_SIZE, URC_CAPACITY, URC_SUBSCRIBERS>::new(); Buffers::<modem::Urc, INGRESS_BUF_SIZE, URC_CAPACITY, URC_SUBSCRIBERS>::new();
let digester = DefaultDigester::<modem::Urc>::default()
.with_custom_success(|buf| {
println!("digested:\n{:?}", buf);
Ok((buf, buf.len()))
});
let (ingress, client) = BUFFERS.split( let (ingress, client) = BUFFERS.split(
tx, tx,
DefaultDigester::<modem::Urc>::default(), digester,
atat::Config::default() atat::Config::default()
); );
interrupt::enable(Interrupt::UART1, interrupt::Priority::Priority1).unwrap();
println!("Starting embassy executor ..."); println!("Starting embassy executor ...");
let cell = StaticCell::new();
let executor: &'static mut Executor = cell.init(Executor::new()); static CELL: StaticCell<Executor> = StaticCell::new();
let executor = CELL.init(Executor::new());
executor.run(|spawner| { executor.run(|spawner| {
spawner.spawn(reader(rx)).unwrap(); let _ = spawner.spawn(ingress_task(ingress, rx));
let _ = spawner.spawn(test_send(client));
}); });
} }

View File

@ -11,23 +11,6 @@ use heapless::String;
#[derive(Clone, AtatResp)] #[derive(Clone, AtatResp)]
pub struct NoResponse; pub struct NoResponse;
#[derive(Clone, AtatCmd)]
#[at_cmd("+CSGT", NoResponse)]
pub struct SetGreetingText<'a> {
#[at_arg(position = 0, len = 32)]
pub text: &'a str,
}
#[derive(Clone, AtatCmd)]
#[at_cmd("AT", GreetingText)]
pub struct GetGreetingText;
#[derive(Clone, AtatResp)]
pub struct GreetingText {
#[at_arg(position = 0)]
pub text: String<64>,
}
#[derive(Clone, AtatCmd)] #[derive(Clone, AtatCmd)]
#[at_cmd("+CGMI", ManufacturerIdText)] #[at_cmd("+CGMI", ManufacturerIdText)]
pub struct GetManufacturerId; pub struct GetManufacturerId;
@ -46,12 +29,3 @@ pub enum Urc {
#[at_urc("+UMWI")] #[at_urc("+UMWI")]
MessageWaitingIndication(MessageWaitingIndication), MessageWaitingIndication(MessageWaitingIndication),
} }
type ModemClient<'a, W> = Client<'a, W, 256>;
pub fn setup_modem<W>(tx: W, res_channel: &'_ ResponseChannel<256>) -> ModemClient<'_, W>
where W: Write {
let config = Config::new();
let client: ModemClient<W> = Client::new(tx, res_channel, config);
client
}